Eagle FishElite 480 Installation And Operation Instructions Manual page 188

Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press re-
EXIT
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press | . B. Or you can jump
ENT ENT
, then press ↓ or ↑ to
down to the lower selection list by pressing
ENT
select a waypoint from the list, then press . The waypoint informa-
ENT
tion screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press . (Go To Waypoint command
ENT
is already highlighted.) The unit will show navigation information to
the waypoint.
B. To find the waypoint, press ↓ to
| . The Map Page
F O M ENT
IND N AP
appears with the cursor highlighting the found waypoint.
180