Overlay Data; Select Data For Display; Turn Off Displayed Data - Eagle FishElite 480 Installation And Operation Instructions Manual

Overlay Data

To change the digital data shown "floating" on top of the Sonar Page or
the Map Page:
First, press
PAGES
To select data for display:
1. From the Map or Sonar page, press
2. Press ↓ or ↑ to select Data Type|
Overlay Data command on the Sonar Menu, at left. Overlay Data
Shown selection menu, right. In this example, we scrolled down the
When selected, the data type shifts to the top of the data list and a
check mark appears beside the data type. (If you wish, you may now
use ↓ or ↑ to select other Data Types for display.)
Data list showing "Ground Speed" selected to display on Sonar Page.
3. To return to the previous page, press
To turn off displayed data:
1. From the Map or Sonar page, press
, use → or ← to select a Page Name, then press
data list to highlight "Ground Speed."
|↓ to
MENU
.
ENT
|
EXIT EXIT
|↓ to
MENU
72
|
O D
VERLAY ATA
.
|
O D
VERLAY ATA
.
EXIT
.
ENT
.
ENT