Fastrack; Fish I.d - Eagle FishElite 502c Installation And Operation Instructions Manual

To switch to Manual Depth Range:
1. Turn off automatic depth range. From the Sonar Page, press
to
A D R
UTO EPTH
2. Press ↑ to
D
3. Press ↓ ↑ to select a different depth range. A horizontal blue bar
highlights the selected range.
4. When the new range is selected, press
To turn Auto Depth Range on again repeat Step 1.
NOTE:
The sonar's depth capability depends on the transducer installa-
tion, water and bottom conditions, and other factors.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen con-
tinues to operate normally. FasTrack gives you a rapid update of condi-
tions directly under the boat. This makes it useful for ice fishing, or
when you're fishing at anchor. When the boat is not moving, fish sig-
nals are long, drawn out lines on a normal chart display. FasTrack con-
verts the graph to a vertical bar graph that, with practice, makes a use-
ful addition to fishing at a stationary location.
Fish arches
Structure
Bottom signal

ColorLine
Fish I.D.
The Fish I.D. feature identifies targets that meet certain conditions as
fish. The microcomputer analyzes all echoes and eliminates surface
clutter, thermoclines, and other signals that are undesirable. In most
instances, remaining targets are fish.
| .
ENT
ANGE
|
R ENT
EPTH ANGE
Sonar Page showing FasTrack.
and the Depth Range Control Scale appears.
EXIT
60
.
Surface clutter
In FasTrack, fish
arches show as
horizontal bars.

FasTrack

bar graph
|↓
MENU