Find Addresses - Eagle FishElite 502c Installation And Operation Instructions Manual

In search results, the distance and bearing to the selected item will be
calculated from the current position. In the case of a cursor search, the
search results show distance and bearing from the cursor, but an indi-
vidual waypoint's information screen shows distance and bearing from
the cursor.

Find Addresses

1. From the Map Page, press
2. Press to search in the Address field.
ENT
3. To enter an address, press ↑ ↓ to change the first number, then press
→ to move the cursor to the next number and repeat until the address
is correct and press
4. To enter a street name, press ↓ to
A. You can spell out the name in the top selection box. Press ↑ ↓ to
change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press
down to the lower selection list by pressing
a street name from the list, then press
lected is now in the street field.
Find Address menu (left). Find Street menu (center)
with Find By Name field active. Street name entry complete (right).
5. To enter a city name, press ↓ to
want to find addresses within a particular city
NOTE:
We recommend that you do not enter a city name unless the list you
are given is too large when searching without it. This unit can ac-
tually search quicker without a city and you save time by not en-
tering a city name.
MENU
.
ENT
|↓ to
F A
IND DDRESS
|
S ENT
TREET
, then press ↓ ↑ to select
ENT
. The street name you se-
ENT
| . You will be asked if you
C ENT
ITY
162
| .
ENT
. There are two options:
|
ENT ENT
. B. Jump