Replacing The Paper Cutter; Removing The Old Cutter - Epson STYLUS Pro WT7900 User Manual

94 | Maintaining and Transporting the Printer
Note: If the optional
SpectroProofer is
attached to the printer,
remove it following the
instructions that came
with it.

Replacing the Paper Cutter

If you notice that your paper isn't being cut cleanly, the cutter may need to
be replaced. You can obtain a new cutter (part number C12C815331). See
page 10 for ordering details.

Removing the Old Cutter

Make sure the printer is turned on, then follow these steps to remove the
blade:
1. Remove any paper from the paper path.
2. Press r .
Menu
3. Press d until
MAINTENANCE
4. Press d until
CUTTER REPLACEMENT
5. When the screen displays
to the replacement position.
6. Turn off the printer.
7. To remove the cutter cover, press in the tab and pull it down.
is highlighted, then press r
, press
EXECUTE
94
.
is highlighted, then press r.
. The paper cutter moves
OK