Using Epson Paper; Guidelines For Using Epson Media - Epson STYLUS Pro WT7900 User Manual

Using Epson Paper

Although the Epson Stylus Pro WT7900 is designed to work primarily with
Epson film, it is possible to print on other selected Epson paper types. Check
the Epson Pro Imaging website at www.proimaging.epson.com or your
Epson Professional Imaging Authorized Reseller for compatible media.
Always test samples of paper stock in the printer before purchasing large
quantities or printing large jobs. If you use non-Epson paper or other media,
you may need to adjust the settings for your paper. See page 73 for
instructions.
The following table shows the paper sizes you can use:
Supported paper sizes
Roll paper
10 to 24.0 in.
Width (203 to 610 mm)
2 in. core: 147.6 ft (45 m)
Length 3 in. core: 662.7 ft (202 m)
Maximum 2 in. core: 4 in. (103 mm)
external roll 3 in. core: 6 in. (150 mm)
diameter
3.15 to 19.7 mil
Thickness (0.08 to 0.5 mm)

Guidelines for Using Epson Media

Follow these guidelines, as well as those included in your paper package,
when printing on Epson paper and other media:
Avoid touching the printable surface with your bare hands. Fingerprints
•
may affect print quality. Handle media by the edges or use cotton
gloves.
Be careful not to bend or scratch the paper.
•
Always choose the correct Media Type setting in your printer software
•
before you send your job. If your paper does not appear on the control
panel, check the instructions included with the paper, or look on the
Epson website (www.proimaging.epson.com). If you are using
Using Film and Other Media
65
Cut sheets
Letter size up to 24 in.
(610 mm)
Up to 62 inches (1580 mm)
—
3.15 to 59 mil (0.08 to 1.5 mm)
| 65