Philips DVDR615/17B User Manual page 59

1
Switch on the TV and, if required, select the channel number for
the DVD Recorder (channel 3 or 4 or Audio In channel).
2
Insert a disc to be used for the recording. The system and
content of the disc will be checked. '
display.
a
b A DVD+RW was inserted that already contains recordings. Use
CH+ A and CH- B to select a location where the recording should
be started.
a
b The inserted DVD is empty.
a
b The inserted disc is a DVD+RW whose contents are not compatible
with DVD Video (e.g. a data disc). This disc cannot be used for
recordings
REC/OTR n button.
a
b A disc can only contain a max. of 48 titles (including the empty titles).
Erase the titles or change the disc.
3
If necessary, switch to TV programming by pressing the
MONITOR button on the remote.
4
Use CH+ A or CH- B to select the channel you want to
record. The following will appear on the display:
SVHS jack (Y/C) S-VIDEO (Y/C) Video jack (CVBS) VIDEO
(CVBS) , Audio jack L AUDIO R for SVHS-jack and Video
jack.
Switching
(CVBS) is done automatically.
Component Video jacks on the back COMPONENT VIDEO Y
PB PR , Audio jacks AUDIO for Component Video
SVHS-/Audio front jacks S-VIDEO / AUDIO left/right
Video/Audio front jacks A/V VIDEO / AUDIO left/right
Switching
automatically.
Digital video (i.Link) front jack DV IN
Recording
until the entire disc is
between jack S-VIDEO
S-VIDEO and
between jack
' will appear on the
erased using the
(Y/C) and VIDEO
VIDEO is
done