Table of Contents
Advertisement
Available languages
Available languages
The following messages may appear on your DVD Recorder display. If you name a disc, the disc
name will appear on the display panel as well.
The DVD Recorder is currently in the initial installation mode. Switch
on your TV and read section 'Initial installation' in chapter 'Installing
your DVD recorder.'
No signal or poor signal strength
The on-screen menu display is on.
Disc tray is opening.
Disc tray is open.
Disc tray is closing.
Disc is being read.
After a successful recording, the list of disc contents is updated.
After the first recording has been successfully completed on a new disc,
the menu structure is created.
The DVD/video cassette you are trying to copy is copy protected.
Please wait until this message disappears. The DVD Recorder is busy
processing another operation.
No disc has been inserted. If a disc has been inserted, then it is possible
that the disc cannot be read.
Information on the inserted DVD is displayed on the screen.
The DVD Recorder is busy making changes DVD-compatible.
Entire disc is being erased.
Inserted disc is new or has been completely erased (no recordings
present).
Disc cannot be recorded on.
The maximum number of titles has been reached for the disc. Each disc
can have a maximum of 48 titles.
The maximum number of chapters per title/disc has been reached. The
maximum number of chapters per title is 99, and 124 per disc.
Disc is full. There is no room for new recordings.
A disc with PAL recordings has been inserted and an attempt was made
to record an NTSC signal. Insert a new disc or use a disc containing
NTSC recordings.
A disc with NTSC recordings has been inserted and an attempt was
made to record a PAL signal. Insert a new disc or use a disc containing
PAL recordings.
Advertisement
Table of Contents
