Table of Contents
Advertisement
Available languages
Available languages
This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong,
you must manually set the date/time (see section 'Manually setting the time & date').
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2
' using D or C .
Select '
3
Select line '
with C .
4
Select line '
with C .
5
Select '
C .
6
Select the corresponding line with CH- B or CH+ A .
7
Select the channel which sends the time/date information in the
line '
will check whether or not the information transfer is possible.
a
b No time/date data can be received from this TV channel.
Select a different channel or '
8
Select one of the following settings in line '
'
': The time set corresponds to summer time (summer time
activated)
'
': The time set corresponds to the winter time (summer time
is off)
9
In the line '
entered was for a different time zone. This is the only way to set
the time correctly, or, if necessary, to correct it.
If you want to use the time zone of the PBS channel, select
'
'.
10
Confirm the changes with OK .
11
To end, press SYSTEM-MENU .
The time and date are automatically transferred from the selected 'PBS channel' after the
Recorder is shut off.
Installing your DVD recorder
' using CH- B or CH+ A and confirm
' using CH- B or CH+ A and confirm
' with CH- B or CH+ A and confirm with
' and confirm with OK . The DVD Recorder
' in line '
', select your time zone if the PBS channel
'.
':
Advertisement
Table of Contents
