Control Panel Features - LG DLGX5171V Owner's Manual

10
INTRODUCING YOUR DRYER

Control panel features

Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual
for more detailed information.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important
Safety Instructions, before operating this dryer.
A
Press to turn the dryer ON. Press again to turn the
dryer OFF.
NOTE
Pressing the ON/OFF button during a cycle will cancel
that cycle and any load settings will be lost.
B
Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets will
be shown in the display. On MANUAL DRY cycles, these
settings can be adjusted using the cycle setting buttons
anytime before starting the cycle.
C
Press this button to START the selected cycle. If the
dryer is running, use this button to PAUSE the cycle
without losing the current settings.
NOTE
If you do not press the START/PAUSE button to
resume a cycle within 4 minutes, the dryer turns off
automatically.
D
To adjust the drying time, use these buttons with
MANUAL DRY, TIME DRY, and STEAM FRESH™ cycles,
as well as the REDUCE STATIC and EASY IRON options.
Press the MORE TIME button to increase the selected
manual cycle time by a minute; press LESS TIME to
decrease the cycle time by a minute.
A E
F
H G
E
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to view
and select other settings.
F
The display shows the settings, estimated time
remaining, options, and status messages for your dryer.
G
The OPTION buttons allow you to select additional
cycle options. Certain buttons also allow you to
activate special functions by pressing and holding the
H
LG's steam technology allows you to inject fabrics with
a swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier. Simply select the
STEAM FRESH™ cycle, or you can add a STEAM option
to selected cycles.
B
C
D