Control Panel Features - LG DLGX3071 Series Owner's Manual

10
INTRODUCING YOUR DRYER

Control panel features

Following are instructions for starting and using your new dryer. Please refer to specific sections of
this manual for more detailed information.
WARNING : To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
including the Important Safety Instructions, before operating this dryer.
Power Button
Operation
Button
Cycle Selector Knob
Start/Pause
Button
ü
- Press to turn the dryer ON. Press again to turn the dryer OFF.
Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost.
ü
- Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets
will be shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
ü
- Press this button to START the selected cycle. If the dryer is running, use this button to PAUSE the cycle
without losing the current settings.
If you do not press the START/PAUSE button to resume a cycle within 4 minutes, the dryer turns off
automatically.
ü
- To adjust the drying time, use these buttons with MANUAL DRY, TIME DRY, and STEAM FRESH™ cycles, as
well as the REDUCE STATIC and EASY IRON options. Press the MORE TIME button to increase the selected
manual cycle time by a minute; press LESS TIME to decrease the cycle time by a minute.
ü
- Use these buttons to select the desired cycle settings for the selected cycle. The current settings are shown
in the display. Press the button for that option to view and select other settings.
ü
- The OPTION buttons allow you to select additional cycle options. Not all settings are available for all cycles.
Refer to the CYCLE GUIDE section of the manual.
ü
- LG's steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier. Simply select the steam fresh™ cycle, or you can add a STEAM option to
selected cycles.
LED Display
Dry Level Temp. Time Dry
Button Control Button
Button
Signal
Button