Test Print - Epson Stylus Pro 7890 User Manual

Epson Stylus Pro 9890/9908/7890/7908

TEST PRINT

Item
NOZZLE CHECK
STATUS SHEET
NETWORK STATUS SHEET
JOB INFORMATION
CUSTOM PAPER
MAINTENANCE
You can perform maintenance functions, such as head cleaning.
Item
CUTTER ADJUSTMENT
CUTTER REPLACEMENT
CLEANING
CLOCK SETTING
User's Guide
The Control Panel
Parameter
PRINT
PRINT
PRINT
PRINT
PRINT
Parameter
EXECUTE
EXECUTE
NORMAL CLEANING
CLEAN EACH COLOR
POWER CLEANING
MM/DD/YY HH:MM
Explanation
You can print a print head nozzle check pattern for
each ink cartridge.
See "Nozzle check" on page 76
You can print the current printer status.
You can print the current network status.
You can print the job information saved in the printer (up
to 10 jobs.)
You can print custom paper information registered in
the CUSTOM PAPER menu.
Explanation
You can fine tune the cutting position when printing to
roll paper with no margins in all directions. When using
this function, a cutter position adjustment pattern is
printed. You can select the cutter position number
within a range of -120 to +120 mil (-3.0 to +3.0 mm) in
increments of 8 mil (0.2 mm).
Starts the cutter replacement operation.
See "Replacing the Cutter" on page 72
You can perform normal cleaning.
You can select the nozzles to clean from the following
two-color combinations; C/VM, PK (MK)/LK, LLK/Y, or
VLM/LC.
You can clean the print head more effectively than
normal head cleaning.
You can set year, month, date, hour, and minute.
23