Using The Control Panel - Epson WorkForce WF-3520DWF User Manual

User's Guide
D
Click the Nozzle Check icon.
E
Follow the on-screen instructions.

Using the control panel

Follow the steps below to check the print head nozzles using the product control panel.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Make sure that A4-size paper is loaded in the paper cassette.
Note:
If the product is equipped with two cassettes, load paper in cassette 1.
C
Enter Setup mode from the Home menu.
D
Select Maintenance.
E
Select Nozzle Check.
F
Press one of the x buttons to print the nozzle check pattern.
Below are two sample nozzle check patterns.
Compare the quality of the printed check page with the sample shown below. If there are no print quality
problems, such as gaps or missing segments in the test lines, the print head is fine.
If any segment of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or a
misaligned print head.
"Cleaning the Print Head" on page 119
&
"Aligning the Print Head" on page 120
&
Maintaining Your Product and Software
118