Canon imageCLASS MF4880dw Basic Operation Manual page 106

How do I use the Scan function when the machine is connected to a computer via a
Q
network?
└
A
You must register the machine to the MF Network Scan Utility fi rst.
To register,
1. From the task tray on your desktop, click [
2. Place a check next to the machine, and then click [OK].
Can I use the scan function when using a machine and drivers that are shared by
Q
another person?
└
A
No, you may not use the scan function when sharing drivers that are installed to
another computer. To use the scan function, install the MF Drivers on your computer.
You can use the supplied user software CD-ROM or download the drivers from the offi cial Canon
Website site (http://www.usa.canon.com).
For details about installing drivers, see the Starter Guide.
Q
To which fi le formats can I save the scanned images?
└
A
You may save scanned fi les to the following formats:
When saving as a PDF fi le, you can create a PDF fi le of a single or multiple page document, or
add a page to an existing PDF fi le.
106
• •
BMP JPEG/Exif
• •
TIFF PDF
].