Apm - Asus SABERTOOTH Z77 User Manual

3.5.7

APM

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
ErP Ready
Restore AC Power Loss
Power On By PCIE/PCI
Power On By RTC
ErP Ready [Disabled]
This item allows user to switch off some power at S5 to get the system ready for ErP
requirement. When set to Enabled, all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PCIE/PCI [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
3-30
Ai Tweaker
Advanced
APM >
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second becomes user-configurable with set values.
Monitor Boot
Disabled Allow BIOS yo switch off some power
at S5 to get the system ready for ErP
Power Off requirement. When set to Enabled, all
other PME options will be switched
Disabled off.
Disabled
Chapter 3: BIOS setup
Exit
Tool