Asus SABERTOOTH Z77 User Manual page 79

Primary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for CPU cores
Use <+> and <-> key to adjust the value at 0.125A increment. .
Secondary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for Internal Graphics cores.
Use <+> and <-> key to adjust the value at 0.125A increment.
DIGI+ Power Control
UEFI BIOS Utility - Advanced Mode
Main Ai Tweaker
Back Ai Tweaker\ DIGI+ Power Control >
CPU Load-line Calibration
CPU Voltage Frequency
VRM Spread Spectrum
CPU Power Phase Control
CPU Power Duty Control
CPU Current Capability
CPU Power Thermal Control
CPU Power Response Control
iGPU Load-line Calibration
iGPU Current Capability
DRAM Current Capability
DRAM Voltage Frequency
DRAM Power Phase Control
DRAM Power Thermal Control
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM spec and affects CPU voltage. The CPU working
voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage
and better overclocking performance, but increases the CPU and VRM thermal. This
item allows you to adjust the voltage range from the following percentages to boost the
system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High) and
100% (Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
ASUS SABERTOOTH Z77
Advanced
Disabled
T. Probe
130
130
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Monitor Boot
Load-line is defined by Intel VRM
Auto spec and affects CPU voltage. The CPU
working voltage will decrease
Auto proportionally to CPU loading. Higher
value could get higher voltage and
good overclocking perfomance but increase
the CPU and VRM thermal.
(1) Regular: 0%
100% (2) Medium: 25%
(3) High: 50%
Auto (4) Ultra High: 75%
(5) Extreme: 100%
Auto
Auto
→←: Select Screen
↑↓: Select Item
100% Enter: Select
+/-: Change Opt.
100%
F1: General Help
F2: Previous Values
Auto
F5: Optimized Defaults
F10: Save
Auto F12: Print Screen
Exit
Tool
ESC: Exit
3-15