Asus SABERTOOTH Z77 User Manual page 38

2. Intel Z77 Serial ATA 3Gb/s connectors (7-pin SATA3G_3–6 [black])
®
These connectors connect to Serial ATA 3Gb/s hard disk drives and optical disc drives
via Serial ATA 3Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
•
•
•
•
2-18
® Rapid Storage Technology through the onboard Intel
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.5.3 SATA Configuration for details.
Before creating a RAID set, refer to section 4.4 RAID configurations or the manual
bundled in the motherboard support DVD.
When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode].
Refer to section 3.5.3 SATA Configuration for details.
You must install Windows ®
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows ® XP Service Pack 3 or later versions.
XP Service Pack 3 or later versions before using Serial
Chapter 2: Hardware information
® Z77