Troubleshooting; The Machine Will Not Start; The Machine Loses All Power During A Program; Drying Takes Too Long - Asko T784 Operating Instructions Manual

Troubleshooting

The machine will not start

Check
• that the door is properly closed.
• that the main power switch is on.
• that the Delayed Start option has not been
selected. To cancel Delayed Start, press the
Stop button for three seconds.
• that any plug is connected.
• that the house fuses have not been tripped.
• that the overheating cut-out has not been
triggered.
The machine loses all power during
a program
The overheating cut-off shuts off the tumble dryer
if the temperature is too high, caused by lint
clogging the lint filter, for instance.
• Clean the lint filter.
• Wait until the machine has cooled, then try
starting it. If it still does not start: Call the
Customer Care Center.

Drying takes too long

• Check that the lint filter is not blocked. See the
"Care and maintenance instructions" chapter.

Error messages

• Read "Drying takes too long" in this chapter if
"Max Program Time" appears on the display.
• If "Clean Lint Filter " appears on the display,
clean the lint filter.
• Call the Customer Care Center if "Thermistor
Fault" appears on the display.
• Press the Stop button to close any error
messages.
Customer Care Center
1-800-898-1879
www.askousa.com
17