Download Print this page

Asko T761 Quick Start Manual

Hide thumbs Also See for T761:

Advertisement

Dryer Quick Start Guide
We know you’re excited about owning an ASKO dryer and you’re anxious to get started, so here is a brief summary of the operating
procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.

THE CONTROL PANEL

Models T761 and T781 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a program, simply press one of the
preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.
Power Button
Press to turn on power
to the machine.
Power Indicator Light
Glows when the power
is turned on.
Start Button
Press to start
a program.
Power Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power
must be on before you can set the programs or start the machine.
Start and Stop Buttons
Once you have selected a program (P1–P4), press this button to start the dryer. If you open the door during a program, the dryer
will stop tumbling automatically. The dryer will remember where in the program it stopped. To continue the program, close the
door and press Start.
You can interrupt a program by pressing Stop for three seconds. If you stop the dryer this way, it cancels the program in progress.
You will have to select a new program and press Start to restart the dryer.
Preset Programs
There are four preset programs, as defined in the table below. To select a program, simply press one of the program buttons and press Start.
For additional programming options, refer to the Use and Care Guide.
With ASKO’s Sensidry™ system, you need never worry about overdrying your laundry. Just select the proper program for the type of fabric
you’re drying and Sensidry does the rest. Once you select a program, Sensidry monitors the temperature and measures the humidity level.
When it detects the appropriate measurements, it automatically shuts off the machine.
Preset
Program
Program
P1
Extra Dry
P2
Dry
P3
Normal Dry
P4
Iron Dry
ASKO’s EasyControl™ panel makes it simple to customize the preset programs to perfectly fit your laundry needs. For example, you can
reprogram the dry temperature, change the cool-down time, set a delayed start, etc. For instructions, refer to “Customizing the Preset
Programs” in your Use and Care Guide.
Preset Programs
Press one of these buttons
to select a program.
Stop Button
Press to stop
a program.
Types of Laundry
Heavy fabrics, such as denim jeans
Towels, cotton, linen, etc.
Permanent press, synthetics, etc.
Washable silk, acrylics, etc.
LCD Window
Displays the program, temperature settings,
and program run time.
Program Selection Controls
These buttons allow you to customize the preset program
settings, such as temperature settings, turning the buzzer off,
setting delay start time, etc. Refer to the Use and Care Guide
for instructions.
Dry
Temp
Normal
Normal
Normal
Low *
* The dry temperature for Program P4 on Model T781 is Normal.
T761/T781
Anti-Crease
Buzzer
1 hour
On
1 hour
On
1 hour
On
1 hour
On

Advertisement

loading

Summary of Contents for Asko T761

  • Page 1: The Control Panel

    T761/T781 We know you’re excited about owning an ASKO dryer and you’re anxious to get started, so here is a brief summary of the operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
  • Page 2: Cleaning The Lint Filter

    Guide for more details. CLEANING THE LINT FILTER Although the lint in your ASKO dryer will be minimal, the lint filter should be cleaned after each load to ensure maximum air flow and prevent possible overheating. To clean the filter, follow the steps below: 1.

This manual is also suitable for:

T781