Asko T761 Quick Start Manual

Dryer Quick Start Guide
We know you're excited about owning an ASKO dryer and you're anxious to get started, so here is a brief summary of the operating
procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
Models T761 and T781 have ASKO's state-of-the-art EasyControl™ panel, as illustrated below. To select a program, simply press one of the
preset program buttons then press Start. Refer to "Preset Programs" below for a definition of these programs.
Power Button
Press to turn on power
to the machine.
Power Indicator Light
Glows when the power
is turned on.
Start Button
Press to start
a program.
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power
must be on before you can set the programs or start the machine.
Once you have selected a program (P1–P4), press this button to start the dryer. If you open the door during a program, the dryer will
Start
stop tumbling automatically. To continue the program from where it stopped, close the door and press Start.
To stop a program, press this button until the dryer stops (about three seconds). If you stop the dryer this way, you will have to select
Stop
a new program and press Start to restart the dryer.
To interrupt a program, simply open the door. The dryer will stop tumbling automatically. To continue the program, close the door and press
Start. The program will continue from the point it was interrupted.
To stop or cancel a program, press and hold the Stop button until the dryer stops (about three seconds). To restart the dryer, you will have to
reselect a program and press Start.
With ASKO's Sensidry™ system, you need never worry about overdrying your laundry. Just select the proper program for the type of fabric
you're drying and Sensidry does the rest. Once you select a program, Sensidry monitors the temperature and measures the humidity level.
When it detects the appropriate measurements, it automatically shuts off the machine.
There are four preset programs, as defined in the table below. To select a program, simply press one of the program buttons and press Start.
For additional programming options, refer to the Use and Care Guide.
Preset
Program Program
P1 Extra Dry
P2 Dry
P3 Normal Dry
P4 Iron Dry
* The dry temperature for Program P4 on Model T781 is Normal.
ASKO's EasyControl™ panel makes it simple to customize the preset programs to perfectly fit your laundry needs. For example, you can
reprogram the dry temperature, change the cool-down time, set a delayed start, etc. For instructions, refer to "Customizing the Preset
Programs" in your Use and Care Guide.
Preset Programs
Press one of these buttons
to select a program.
P1 P2 P3
Start Stop
Program Selection Controls
Stop Button
These buttons allow you to customize the preset program settings,
Press to stop
such as temperature settings, turning the buzzer off, setting delay
a program.
start time, etc. Refer to the Use and Care Guide for instructions.
Types of Laundry
Heavy fabrics, such as denim jeans
Towels, cotton, linen, etc.
Permanent press, synthetics, etc.
Washable silk, acrylics, etc.
LCD Window
Displays the program, temperature settings,
and program run time.
P4
Dry
Temp
Normal
Normal
Normal
Low *
Anti-Crease Buzzer
1 hour On
1 hour On
1 hour On
1 hour On