Adding A Network Printer - Dymo 1752265 User Manual

Printing Over a Network
To share the printer
1
2
3
4
5

Adding a Network Printer

Before you can print to a shared network printer, you need to install DYMO Label Software (DLS)
on your local computer and then add each network label printer you wish to use.
Note
Add Printer Wizard twice; once for the LabelWriter Duo label printer and once for the LabelWriter
Duo tape printer.
10
Choose Printers and Faxes from the Start menu.
The Printers and Faxes control panel is displayed.
Right-click the printer you want to share and select Sharing.
The DYMO label printer Properties dialog boxappears with the Sharing tab selected.
Select Share this printer.
Optionally, enter a different name for the printer in the Share name box.
This is the printer name that appears to other users on the network.
Click OK.
The share icon (hand) is displayed under the shared printer. This indicates that other users in
the workgroup can print to this printer.
The LabelWriter Duo printer is actually two printers (label and tape) so you must run the