Preparing For First-Time Use; Charging The Battery - Magellan MobileMapper CE - Hiking GPS Receiver Getting Started Manual

Preparing for First-Time Use

Charging the battery

Before using your MobileMapper CE handheld PC, you must
first charge the battery:
1. Locate the removable battery.
2. Open the battery door.
3. Insert the battery into the battery compartment in the
back of the MobileMapper CE handheld as shown below:
4. Close the battery door and tighten the screws.
5. Attach the Clip-on I/O module to the MobileMapper CE
handheld as shown below (insert lower part first):
5