Ntrip - Magellan MobileMapper CE - Hiking GPS Receiver Getting Started Manual

36

NTRIP

Warning! Using NTRIP requires that you have previously fol-
lowed the entire procedure described in Step-by-Step Proce-
dure for Establishing a GPRS Connection Via Bluetooth on
page 17.
Then do the following to implement the NTRIP DGPS mode:
, then Programs>GPS Utilities>DGPS Configuration.
- Tap on
- Tap on the Select Mode button.
- In the Select Differential Mode window, enable the NTRIP
option.
- Tap OK. The first time you select NTRIP, the message No
NtripCaster specified appears.
- Tap OK to close the message window. This opens the
NTRIP Settings window.
- Tap the NtripCaster button on top of the screen. The Ntrip-
Caster Connection window opens in which you can store
several NTRIP configurations.
Each NTRIP configuration holds the key information
allowing MobileMapper CE to connect to a given NTRIP
caster. Having the capability to save several NTRIP config-
urations in MobileMapper CE will therefore allow you to
quickly change the NTRIP caster without having to re-
enter the relevant connection parameters each time you
do that.
- To enter your first NTRIP configuration, with New selected
in the NTRIP Configuration field, tap on the Add button and
then enter the following parameters:
• Name: NTRIP Configuration Name (freely choose a
name)
• Host: Host IP address
• Port: Port number
• Login: User name
• Password: User password
(The last four parameters should have been passed on
to you by the NTRIP provider.)