Chamberlain Elite EL25 Instruction Manual page 3

Resident Instructions (continued)
Direct Command (Single Family Residence ONLY):
Direct command allows you to control the unit from the residence phone.
Press
1
The unit is now prepared to accept a direct command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
a CYCLE DOOR:
Press
Cycles relay. Typically used to momentarily open a door/gate for a visitor without
having the visitor initiate a call.
b TOGGLE DOOR OPEN/CLOSE UNTIL:
Press
Activate or deactivate the door relays associated with the relay group until a specified time of day.
If the door is currently latched open or in the unlock position of an automatic time zone then
step 122 will latch the door closed and vice versa.
c
GET DOOR STATUS:
Press
Hear the status for a specified door. The status is open when the door is currently latched open,
or in the unlock portion of an automatic time zone. The staus is closed for all other times.
d RELEASE DOOR:
Press
Deactivates the door's relay associated with the relay group until a specified time of day,
manually prompted to deactivate with a Release Door command, or a schedule
override to unlock the door.
e ENABLE/DISABLE CALL FORWARDING FOR RESIDENCE:
Press
f ENABLE/DISABLE DO NOT DISTURB FOR RESIDENCE:
Press
(Optional) Select the Door (1-4) that you want to control. Press
3
ONLY for step #2 sections "b" and "c" - Enter the Latch Time (hhmm = Hour and Minute). Then
4
EXAMPLE:
1
Activates Relay(s) assigned to Door #2 until 8:20 AM.
from the residence phone.
ABC
then
ABC ABC
then
ABC DEF
then
ABC GHI
then
JKL
ABC
5
1 2
ABC MNO
1 2 6
2
121 122 123 124 125 126
then enable (1) or disable (2) then
then enable (1) or disable (2) then
. NOTE : If no door is selected then Door 1 is used.
3 4
NOTE: The door was not previously latched open or in the unlock
portion of an automatic time zone.
.
Relay will activate now.