Resident Instructions (continued)
Using Entry Codes
An Entry Code allows access to a controlled area by entering a numeric code on
the unit keypad.
Enter your assigned Entry Code (3-9 digits). If you make an error while entering
your code, press "✱" to cancel.
Speaking Through the Unit:
This feature is used to initiate communications from the resident phone through the unit at any time. The communication is two-way.
You may use your phone as described in "When you answer the visitor's call."
1
Press
2
Enter the Unit ID code (if applicable).
Press
3
from the residence phone.
then
and begin speaking. Hang up when finished.
120