Screen Saver Mode (Vf Only) - Chamberlain Dial Code Owner's Manual

USING KEYCODES AND UTILITY CODES
RESIDENT 6-DIGIT KEYCODES
Residents are assigned a 6-digit, personalized keycode
for accessing the facility. To use the keycode assigned,
the resident must first push the
enter their keycode. The screen will display "Access
Granted" (fig a.) and access will be allowed. If an
incorrect keycode is entered, the system will inform the
user of the invalid entry (fig b.) The resident can then
re-enter their keycode.
EXAMPLE - KEY CODE 002543 =
INDIVIDUAL UTILITY CODES
All systems, no matter what the memory capacity, are
equipped with 60 different Utility codes. To access the
facility within the time zone set, the Utility Company
must first press the
their 4-digit code. If it is within the programmed time
zone for entry, the screen will display "Access
Granted" (fig c.) and access will be allowed. If,
however, it is not within the time zone for entry, the
display will inform the user and access will not be
allowed (fig d.)
EXAMPLE - UTILITY CODE 8716 =

SCREEN SAVER MODE (VF ONLY)

If the VF Dial Code System is inactive for 15 seconds it
will go into sleep mode. The screen will continue to
display the scrolling message "Press Any Key" until a
key is pressed (fig e.) The Screen saver mode is not
available while in program mode.
RESIDENT USE
key once and
key TWICE and then enter
LC/VF Page
(ACTIVE ENTRY 1 ONLY)
* ACCESS GRANTED *
Please Enter
* INVALID ENTRY *
Invalid 6-Digit Code
0 0
* ACCESS GRANTED *
Please Enter
* ACCESS DENIED *
Not In Access Period
8
PRESS ANY KEY
4
(fig a.)
(fig b.)
3
2 5 4
(fig c.)
(fig d.)
7 1 6
(fig e.)