Back-Up Memory - Chamberlain Dial Code Owner's Manual

In the Program Selection Screen (fig b.),
B
Press the key.
Insert additional memory card in the
Backup Slot.
NOTE: Back-up Memory card must be
the same size or greater than the Main
Memory card being backed up.
The screens will display when the cards
were last updated. (fig c.) and (fig d.)
Use the
through the information.
Press the key to Backup.
Press the key to exit the backup
process (fig e.).
Pressing the
IMPORTANT NOTE: While in the help screens, programming will be disabled.
To continue programming, press the

BACK-UP MEMORY

keys to scroll
button will provide users with a help message.
LC/VF Page
34
NOTE: You must have an extra memory card (sold separately)
installed in the RS485 Slot (fig a.) of the Processor in order to
perform the backup process.
SELECT PROG MODE:
(V)Volume (B)Backup
MAIN Card Updated On
05-15-01 03:50am
BACKUP Card Updated
02-11-01 04:20am
(ENTER) To Backup
(EXIT) To Quit
button to exit the help screens first.
Back-Up Memory Card Release Button
(fig a.)
(fig b.)
(fig c.)
(fig d.)
(fig e.)