Operating The Blade Server Cover - IBM LS20 - BladeCenter - 8850 Service Manual

Operating the blade server cover

To open the blade server cover, complete the following steps.
1. Read the safety information that begins on page v and "Installation guidelines"
2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing
3. Carefully lay the blade server down on a flat, non-conductive surface, with the
4. Press the blade-cover release on each side of the blade server and lift the
5. Lay the cover flat, or lift it from the blade server and store it for future use.
64
AMD Opteron LS20 Type 8850 for IBM BladeCenter: Problem Determination and Service Guide
Blade-cover
release
on page 59.
and installing the blade server in a BladeCenter unit" on page 61 for
instructions).
cover side up.
cover open.
Blade-cover
release