IBM BladeCenter JS21 Types 8844 Service Manual page 94

SRN FFC
814-112 814
814-113 221
814-114 814
815-100 815
815-101 815
815-102 815
815-200 815
7C0
815-201 815
817-123 817
817-124 817
817-210 817
817-211 817
817-212 151
817-213 817
817-215 817
817-217 817
887-101 887
887-102
887-103 887
887-104 887
887-105 887
887-106 887
887-107 887
887-108 887
887-109 887
887-110 887
887-111 887
887-112 887
887-113 887
887-114 887
887-115 887
887-116 887
887-117 887
887-118 887
887-120 887
887-121 B08
887-122 B09
887-123 887
887-124 887
78
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description and action
The NVRAM test failed.
The VPD test failed.
I/O Card NVRAM test failed.
The floating-point processor test failed.
Floating point processor failed.
Floating point processor failed.
Power-on self-test indicates a processor failure.
Processor has a status of failed. Processors with a failed status are deconfigured and
therefore cannot be tested or used by the system.
The I/O planar time-of-day clock test failed.
Time of day RAM test failed.
The time-of-day clock is at POR.
Time of day POR test failed.
The battery is low.
The real-time clock is not running.
Time of day clock not running test failed.
Time of day clock not running.
POS register test failed.
887I/O register test failed.
Local RAM test failed.
Vital Product Data (VPD) failed.
LAN coprocessor internal tests failed.
Internal loopback test failed.
External loopback test failed.
External loopback test failed.
External loopback parity tests failed.
External loopback fairness test failed.
External loopback fairness and parity tests failed.
External loopback (twisted pair) test failed.
External loopback (twisted pair) parity test failed.
Ethernet loopback (twisted pair) fairness test failed.
External loopback (twisted pair) fairness and parity tests failed.
Twisted pair wrap data failed.
Software device configuration fails.
Device driver indicates a hardware problem.
Device driver indicates a hardware problem.
Ethernet transceiver test failed.
Ethernet 10 base-2 transceiver test failed.
Internal loopback test failed.
Software error log indicates a hardware problem.