IBM BladeCenter JS21 Types 8844 Service Manual page 75

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
BA154060
BA170000
BA170100
BA170201
BA170202
BA170203
BA170210
BA170211
BA170220
BA170221
BA170998
Description
Failed to initialize the HEA port or queue 1. Check for server firmware updates; apply if
NVRAMRC initialization failed; device
test failed
NVRAM data validation check failed
The firmware was unable to expand
target partition - saving configuration
variable
The firmware was unable to expand
target partition - writing error log entry
The firmware was unable to expand
target partition - writing VPD data
Setenv/$Setenv parameter error - name
contains a null character
Setenv/$Setenv parameter error - value
contains a null character
Unable to write a variable value to
NVRAM due to lack of free memory in
NVRAM.
Setenv/$setenv had to delete stored
firmware network boot settings to free
memory in NVRAM.
NVRAMRC script evaluation error -
command line execution error.
Action
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Shut down the blade server; then, restart it.
2. Go to "Checkout procedure" on page 106.
3. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Reduce the number of partitions, if possible,
to add more memory in NVRAM to this
partition.
2. Go to the checkout procedure on page xx.
3. Replace the system board and chassis
assembly.
The user may need to reenter adapter and
network parameters for network boot or
installation.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
Chapter 2. Diagnostics
59