IBM BladeCenter JS21 Types 8844 Service Manual page 38

v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is resolved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Progress code
CA00E102
CA00E105
CA00E10A
CA00E10B
CA00E110
CA00E130
CA00E131
CA00E134
CA00E135
CA00E136
22
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
Load and initialize RTAS
Transfer control to operating system
(normal mode boot)
Load RTAS device tree
Set RTAS device properties
Create KDUMP properties
Build device tree
Create root node properties
Create memory node
Create HCA node
Create BSR node
Action
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
Go to "Boot problem resolution" on page 112.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Reboot the blade server.
2. Check for server firmware updates; apply if
available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Reboot the blade server.
2. Check for server firmware updates; apply if
available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.