Table of Contents
Advertisement
O O
P P
E E
R R
A A
T T
O O
P P
E E
R R
A A
Image Menu
The following adjustments and settings are available when IMAGE is
selected on the menu. Select an item with the
start or stop operation with the
Table 6. Image Menu
Item
Select Blank Screen: Select the screen in case of the BLANK mode with the
button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the
BLANK mode is ON.
BLANK
MyScreen is a mode that the customer-customized screen is displayed. This is the
blue screen at the factory setting. Refer to the description of MyScreen below.
ORIGINAL is a mode that the factory fixed screen is displayed.
• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.
Select Start Up Screen: Select the screen in case of no signal input with the
button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when
no signal is input.
My Screen is a mode that the customer-customized screen is displayed. This is the
START UP
blue screen at the factory setting. Refer to the description of MyScreen below.
ORIGINAL is a mode that the factory fixed screen is displayed.
TURN OFF displays the blue screen.
• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.
Set MyScreen Mode: Select the EXECUTE with the
MyScreen menu and set the MyScreen mode for BLANK and START UP functions.
ESC clears and closes the menu box.
NORM. is default of the MyScreen menu.
FREEZE freezes the image and displays the frame to capture.
Press the
In the MyScreen Capture Position mode, the buttons
move the frame to capture.
After adjusting the position, press the KEYSTONE button to go to the MyScreen
MyScreen
Display Size mode.
To cancel freezing and return to the NORM. of the MyScreen menu, press the
RESET button.
In the MyScreen Display Size mode, select the magnification x1, x2 or FULL with
the button
go to the CAPT. mode and start capturing.
To return to the MyScreen Capture Position mode, press the RESET button.
CAPT. executes a capturing the image. It requires about 20 seconds. After capturing,
the captured image will be displayed for about 10 seconds.
MIRROR
Select Mirror Status: Select mirror status with
Select Position of P. in P. Display : Press the
P. IN P.
POSIT
• Valid only at RGB IN 1, RGB IN 2 or DVI input.
P. IN P.
Select signal of P. in P. Display : Press the
INPUT
VIDEO
Select Gamma Mode: Select the gamma mode with the
GAMMA
NORMAL
ENGLISH-14
ENGLISH-14
I I
O O
N N
S S
( (
T T
I I
O O
N N
S S
and
button after freeze to go to the MyScreen Capture Position mode.
/
. After selecting the magnification, press the KEYSTONE button to
↔
↔
↔
S-VIDEO
↔
CINEMA
c c
o o
n n
t t
i i
n n
( (
c c
o o
n n
t t
i i
n n
and
buttons, and
buttons.
Description
↔
↔
DYNAMIC
u u
e e
d d
) )
u u
e e
d d
) )
SETUP
INPUT
BLANK
START UP
MyScreen
MIRROR
P. IN P. POSIT
P. IN P. INPUT
GAMMA
button to display the
,
,
and
/
button.
or
button.
or
button.
/
button.
IMAGE
OPT.
MyScreen
ORIGINAL
/
/
allow to
Advertisement
Table of Contents
