Installation; Installation Of The Projector And Screen; Angle Adjustment; Table 1. Installation Reference - Dukane 28A8910 User Manual

Liquid crystal projector
Hide thumbs Also See for 28A8910:
Table of Contents

Advertisement

INSTALLATION

INSTALLATION

Installation of the Projector and Screen

Refer to the drawing and table below for determining of the screen size and projection distance.
The projection distances shown in the table below are for
full size (1024 x 768 dots).
a: Distance from the projector to the screen. (±10%)

Table 1. Installation Reference

Screen size
[inches (m)]
40 (1.0)
60 (1.5)
80 (2.0)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
CAUTION • Install the projector in a suitable environment according to instructions of
the accompanying manual "SAFETY INSTRUCTIONS" and this manual.
• When you fix this unit with a metal tool and the like, you must connect it with ground
wire; otherwise, fire or electric shock can result.
Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the
building using an optional three-core power-supply cord.
• Please basically use liquid crystal projector at the horizontal position. If you use liquid
crystal projector by the lens up position, the lens down position and the side up position, this
may cause the heat inside to build up and become the cause of damage. Be especially careful
not to install it with ventilation holes blocked.
• Do not install LCD projector in smoke effected environment. Smoke residue may buildup
on critical parts (i.e.LCD panel, Lens Assy etc.).

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable
within 0˚ to 9˚ approximately.
Foot Adjusters
1. Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection
angle.
2. Release the button to lock at the desired angle.
3. Make the foot adjusters screw for fine adjustment. Do not force the adjusters to make screw. This
could damage the adjusters or cause the lock to fail.
CAUTION • Do not release the foot adjuster button unless the projector is being held;
otherwise, the projector could overturn or the fingers could get caught and cause
personal injury.
ENGLISH-6
a [inches (m)]
Min.
Max.
62 (1.6)
82 (2.1)
94 (2.4)
123 (3.1)
127 (3.2)
164 (4.2)
160 (4.1)
205 (5.2)
192 (4.9)
246 (6.3)
241 (6.1)
308 (7.8)
323 (8.2)
411 (10.4)
Press the foot
adjuster button
Top View
a
Side View

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagepro 8910

Table of Contents