Table of Contents
Advertisement
MULTIFUNCTIONAL SETTINGS (continued)
INPUT Menu
The three Input menu items listed in the table below can be manipulated. For
RGB input, the reception signal's horizontal and vertical frequency is displayed
on the initial menu screen. Use the table below as a guide for operation.
INPUT Menu
Item
BNC
VIDEO
HDTV
SYNC ON G
P. IN P. INPUT
P. IN P. POSIT
(*) The P. IN P. (picture-in-picture) function displays the video signal image in a subscreen (P. IN P. screen) on
top of the screen on which the RGB signal image is being displayed. (See "Displaying Child Window" Vol.1
24
.)
4
BNC Pin (R/C
/P
, G/Y, B/C
R
R
⇔
BNC (RGB)
(R) (G) (B) (H) (V)
(Pins for RGB)
Selecting BNC (RGB) allows the 5 RGB2 pins (R/C
used as RGB signal BNC input as-is.
Selecting BNC (COMPONENT) allows the 3 leftmost RGB2 pins (R/C
B/C
/P
) to be used as the COMPONENT VIDEO input C
B
B
Select Mode of Signal Type (for VIDEO/S-VIDEO):
⇔
AUTO
NTSC
M-PAL
⇔
N-PAL
When AUTO is selected, the video/ S-video input function under ADJUST (
executed simultaneously so that the optimum signal mode is selected from among the modes listed above.
Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)
• AUTO mode may not function correctly with a PAL60 signal and certain other signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select HDTV Signal Mode: 1080i
• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.
On/Off SYNC ON G Mode: TURN ON
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode
allows reception of SYNC on G.
• In the SYNC ON G mode, the picture may be distorted with certain input
signals. In such a case, remove the signal connector so that no signal is
received and turn SYNC ON G off, and then reconnect the signal.
P. IN P. screen (*) input signal selection: VIDEO
Selects the signal displayed on the P. IN P. subscreen.
P. IN P. screen (*) display position selection:
⇔
⇔
Selects the position at which the P. IN P. subscreen is displayed.
Description
/P
, H, V) function selection:
B
B
BNC (COMPONENT)
(C
/P
) (Y) (C
/P
) ( - ) ( - )
R
R
B
B
(Pins for COMPONENT)
⇔
⇔
PAL
SECAM
⇔
1035i
⇔
⇔
MENU
MAIN
BNC
PICTURE-1
VIDEO
PICTURE-2
HDTV
INPUT
SYNC ON G
AUTO
P. IN P. INPUT
SCREEN
P. IN P. POSIT
OPTION
WIRELESS
: SELECT
Example : INPUT Menu
(BNC)
/P
, G/Y, B/C
/P
, H, V) to be
R
R
B
B
/P
, Y, and C
/P
R
R
B
⇔
NTSC4.43
5
) are enabled, and is
TURN OFF
⇔
S-VIDEO
RGB
COMPONENT
/P
, G/Y,
R
R
pins.
B
⇔
Advertisement
Table of Contents
