Turning Off The Power - Dukane 28A8247 User Manual

TURNING OFF THE POWER

LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
FOCUS ZOOM PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY VOLUME
ON
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
Control panel
INPUT
RGB
KEYSTONE
BNC
ONE TOUCH
DVI
FOCUS
VIDEO
RESET
S-VIDEO
MENU
COMPONENT
STANDBY/ON TENP LANP
NOTE
• Except in cases of
emergency, do not turn off
the power switch while the
STANDBY/ON indicator is
solid or flashing green.
Doing so could shorten
the lamp lifetime.
Press the STANDBY/ON button (control
1
panel or remote control)
The message "Power off?" will appear on the screen for
approximately 5 seconds.
Press the STANDBY/ON button again
2
(control panel or remote control)
Press the STANDBY/ON button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. While cooling, the STANDBY/ON indicator flashes orange.
When in this state, pressing the STANDBY/ON button has no
effect.
When lamp cooling is complete, the STANDBY/ON indicator stops
flashing, and turning solid orange.
Check that the STANDBY/ON indicator
3
stops blinking and lights to
ZOOM
solid orange.
Switch the power switch to
[O] (OFF).
STANDBY/ON indicator
Confirm that the STANDBY/ON indicator has
4
gone off and then attach the lens cap.
When the projector has completed powering down, the
STANDBY/ON indicator will go off.
STANDBY/ON
STANDBY/ON
power switch
17