Table of Contents
Advertisement
OPTION Menu
With the OPTION menu, the five items shown in the Table below can
be performed.
Please perform each operation in accordance with the instructions in
the Table.
OPTION Menu
Item
VOLUME
Adjust Volume: High
Selecting the remote control receiver:
The unit has 3 remote control receivers, as shown in the figure
to the right (1, 2, and 3). You can select which of them to
activate ("v" in the figure), and which to disable.
IR REMOTE
• The ambient lighting and other factors may prevent the
Refer to LAMP TIME: When set, this function displays the total time the
projector lamp has been used since new.
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
LAMP TIME
displayed. The reset menu will then appear. After you replace the lamp with a
new lamp, select RESET on the menu with the
• Do not reset the lamp time unless you have replaced the lamp. And, always
• Before replacing the lamp, carefully read the descriptions headed "THE LAMP".
Refer to FILTER TIME: This function displays the total time the air-filter has
been used since new.
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
displayed. The reset menu will then appear. After you replace the filter, select
RESET on the menu with the
FILTER TIME
RESET
• Do not reset the filter time unless you have cleaned or replaced the filter. And,
• Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
WIRELESS Menu
The WIRELESS menu is only enabled if the wireless function is enabled. Using the
wireless function requires a Wireless & Network Module Terminal (sold separately). See
the Wireless & Network Module Terminal user's manual for more information about the
WIRELESS menu. Contact your local dealer for more information about the wireless
function and Wireless & Network Module Terminal.
remote control operation from functioning properly. If this
happens, use this function to disable receivers being
impacted by unneeded light.
reset the lamp time when replacing the lamp.
⇔
CANCEL
always reset the filter time when cleaning or replacing the filter. The message
functions will not operate properly if the filter time is not reset correctly.
Description
⇔
Low
button.
MENU
MAIN
VOLUME
PICTURE-1
WHISPER
PICTURE-2
IR REMOTE
INPUT
LAMP TIME
AUTO
FILTER TIME
SCREEN
OPTION
WIRELESS
: SELECT
Example : OPTION Menu
(VOLUME)
2
1
1
2
1
2
1
2
1
2
1
2
1
2
1
2
button.
12
3
3
3
3
3
3
3
3
7
Advertisement
Table of Contents
