Setting The Presentation Timer - BenQ MW712 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation
time on the screen to help you achieve better time
management when giving presentations. Follow these
steps to utilize this function:
1. Press Timer Set up on the remote control or go
to the SYSTEM SETUP: Basic > Presentation
Timer menu and press MODE/ENTER to display
the Presentation Timer page.
2. Highlight Timer period and decide the timer
period by pressing
be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute
increments.
3. Press
on the screen by press
Selection
Always
Last 1 Min/Last 2
Min/Last 3 Min
Never
4. Press
Top-Left
5. Press
direction by pressing
Selection
Count Up
Count Down
6. Press
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
MODE/ENTER.
8. A confirmation message displays. Highlight Yes and press MODE/ENTER to
confirm. You will see the message "Timer is On" displaying on the screen. The
timer starts counting at the time the timer is on.
To cancel the timer, perform the following steps:
1. Go to the
Off.
38
Operation
/ . The length of time can
to highlight Timer display and choose if you want the timer to show up
/
ing
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
to highlight Timer position and set the timer position by pressing
Bottom-Left
to highlight Timer counting direction and select your desired counting
/
.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
to highlight Sound reminder and decide if you want to activate sound
/ . If you select On, a double beep sound will be heard at
SYSTEM SETUP: Basic
.
Top-Right Bottom-Right
and press
> Presentation Timer menu and highlight
/ to select On and press
/
.