Network Menu; Ethertalk Page (8830/8825 Only); Netbeui Page (8830/8825 Only) - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Network Menu

EtherTalk Page (8830/8825 only)

Navigation: PRINTER DEFAULTS > NETWORK > EtherTalk
If you entered the printer password in the Session Setup, you can change the following
EtherTalk parameters in the printer:
1. Enabled - Click on this check box to enable/disable EtherTalk on the printer.
2. EtherTalk Zone - Enter the AppleTalk zone name (up to 31 characters) upon which the
printer operates in this text box. Enter * (asterisk) to use the EtherTalk router's default
zone.
3. EtherTalk Phase - Click on the Phase 1 or Phase 2 radio button to select the EtherTalk
phase.
4. AppleTalk Printer Name - Enter the printer name (up to 31 characters) for the AppleTalk
protocols in this text box.
5. Press the Update Printer button to send the requested parameter changes to the printer.
Note that if the Enabled box is not checked, the parameters will be updated but EtherTalk
will remain inactive on the printer.

NetBEUI Page (8830/8825 only)

Navigation: PRINTER DEFAULTS > NETWORK > NetBEUI
If you entered the printer password in the Session Setup, you can change the following
NetBEUI parameters in the printer:
1. Enabled - Click on this check box to enable/disable NetBEUI on the printer. When
checked, NetBEUI is enabled.
2. NetBEUI Group - Enter the group name (up to 15 characters) of the printer in this text
field.
3. NetBEUI Machine Name - The field displays the NetBEUI Machine Name for the printer.
This is a read-only field.
4. NetBEUI Remark - In this text box, enter the Remark string (up to 47 characters) for the
NetBEUI protocol. This field is used to identify the printer with a name that is recognizable
on your network.
5. Press the Update Printer button to send the requested parameter changes to the printer.
Note that if the Enabled box is not checked, the parameters will be updated but NetBEUI
will remain inactive on the printer.
Page 28
Web Print Manager Tool User Guide