Calcomp 906/907 Page - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

will be ignored.) This can be useful when printing certain defective files (i.e.,
incompatible with HP-750C printers).
10. Termination Conditions - Click on this group of check boxes to enable/disable which
HPGL commands will cause a plot to be terminated (completed). The available check
boxes are AF, AH , FR , NR , PG , RP, SP, and Plotter Off.
11. Press the Update Printer button to update the specified parameter changes in the
printer.

Calcomp 906/907 Page

Navigation: PRINTER DEFAULTS > EMULATIONS > Calcomp 906/907
If you entered the printer password in the Session Setup, you can change the following
CalComp 906/907 parameters in the printer:
1. Step Size (resolution) - Enter the CalComp plotter step size (resolution) in this text
box. Most CalComp plot files use a step size of 2032. The range is from 50 to 4064.
2. Assigned Palette - Click on this list box to select the default pen palette (0 to 8) for
CalComp plots.
3. Job overrides assigned pen palette - Click on this check box to enable/disable the
override option. If this box is checked, any pen settings in the CalComp plot file will
override the assigned default pen palette. If this box is not checked, the assigned
default pen palette will be the source for the attributes of all pens used in CalComp
plots. The only exception is for individual pens using the override setting of the Pen
Attributes Page, accessed by clicking a pen number on the Pen Palettes Page of the
Printer Defaults Side Menu.
4. Message Format - This group of parameters modifies how the CalComp 906/907
interpreter works. The printer will automatically determine the correct values for the
three numerical parameters if they are not set correctly.
Ÿ EOM Character - This text box is used to set an EOM character to a decimal
value. Enter a number between 0 and 31.
Ÿ SYNC Character AH - This text box is used to set a SYNC character to a decimal
value. Enter a number between 0 and 127.
Ÿ Number of SYNC Chars - Click on this list box to select 1 or 2 as the number of
SYNC characters expected in the CalComp jobs sent to the printer.
Ÿ Checksum Enable - Click on this check box to enable/disable the CalComp
interpreter to utilize the checksum in the CalComp 906/907 data message blocks.
5. Termination Conditions - Click on this group of check boxes to enable/disable which
CalComp commands will cause a plot to be terminated (completed). For Search
Address termination, you can enable either 999 or 9999 or both. When the EOP box is
checked, click on the list box to select 1 or 2 as the number of EOP commands in the
plot termination sequence. The other available check boxes are Manual, New Plot,
Pause, Force Plot, Start Plot and Top of Form.
6. Press the Update Printer button to update the specified parameter changes in the
printer.
Page 40
Web Print Manager Tool User Guide