Uploading A File; Canceling A Print Job; Set Display Units Page; Setting The Accounting Mode - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Uploading a File

1. Click on Printer Defaults > Utilities > Upload File .
2. In the Select the file to upload field, enter the filename (with extension) and its
location. To view the standard Open File dialog, press the Browse button.
3. Press the Upload button to transfer the file to the system AccXES Controller. A
message page will display stating the success or failure of the request. The file will
print out.

Canceling a Print Job

1. Send a few print jobs to the printer by doing one of the following:
Ÿ Send a test print (Printer Defaults > Test Print > Normal Test).
Ÿ Upload a file.
Ÿ Scan images.
2. Select BACK to MAIN.
3. Press the Get Status button to update the Job Queue List.
4. Click on an active print Job Name (the name is a hypertext link) and the Selected Print
Job page will display.
5. Press the Cancel button to cancel this print job. The Canceled Print Job page will
display, showing that the job was canceled, or is in the process of being canceled.
6. Press the OK button or the BACK TO MAIN link to return to the Main Page.
For any mismatched job, indicated in the Status column of the Job Queue, click on the
supplied checkbox to obtain information about the mismatch condition. The printer
password is not required.
NOTE: In the AccXES Client Tools, to cancel a submitted job, highlight the job name
in the Printer Queue window. Select the Cancel toolbar button.

Set Display Units Page

If you entered the printer password, from the Session Setup link on the Main Menu, you can
set the units of measure for the Web PMT pages by doing the following:
1. Click on PRINTER DEFAULTS > UTILITIES > Set Display Units to go to the Set
Display Units page.
2. Click on the appropriate radio button, mm/cm (millimeters/centimeters) or in. (inches),
to select the display units.
3. Press the Update Printer button to set the selected units in the printer. A message will
be displayed which will state the success or failure of the request.

Setting the Accounting Mode

1. Click on ACCOUNTING and the Accounting page will display.
Page 14
Web Print Manager Tool User Guide