Loading The Standard 250-Sheet Tray - Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic User Manual

6
Press the arrow buttons until the correct unit of measure appears, and then press
Submitting changes appears, followed by the Universal Setup menu.
7
Press , and then press
Specify the paper height and width
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows
the printer to support the size, including support for standard features such as duplex printing and printing multiple
pages on one sheet.
1
From the Universal Setup menu, press the arrow buttons until Portrait Width or Portrait Height
appears, and then press
Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper
width setting.
2
Press the arrow buttons to decrease or increase the setting, and then press
Submitting changes appears, followed by the Universal Setup menu.
3
Press , and then press

Loading the standard 250-sheet tray

The printer has one standard 250-sheet tray (Tray 1) with an attached manual feeder. The 250-sheet tray, the 650-sheet
duo drawer, and the optional 550-sheet tray support the same paper sizes and types and are loaded in the same way.
Note: The optional 550-sheet tray is not available for all printer models.
1
Pull the tray out.
Note: Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
to return to the Ready state.
.
to return to the Ready state.
Loading paper and specialty media
41
.
.