Page Settings - Konica Minolta bizhub PRO 1051 User Manual

Windows Printing
6.3.6

Page Settings

The Page Settings panel allows you to select trays for each page of the job
individually.
Each line entered under Page Specific Options specifies that the settings
selected in this row shall be applied to the given page numbers.
Pages must be entered as a comma separated list of individual page
numbers, or of page ranges where the lower and upper bounds are
separated by a dash. Pages count from 1 and refer to the pages included
in the job. If your document contains Roman numbering, or if you print only
one section of a book, the page numbering in the job may deviate from the
page numbering in your document. For example, the following inputs are
equivalent: 1,3,4,5,7 and 1,3-5,7
If duplex printing is selected for the job or for a set of pages, each
individual page and each start of a page range are forced on a new sheet.
E.g., if the job shall be printed duplex on tray 1, and page 18-25 on tray 3,
then pages 1-17 will be printed from tray 1, page 17 will have an empty
back page, and pages 18-25 will be printed starting on a new sheet from
tray 3.
bizhub PRO 1200/1200P/1051
6
6-38