6.3
Storing in the Hard Disk
4
Input the Box Name and press [OK].
% Make sure to input the box name that has been registered in the controller. For details, refer to
page 5-6.
The job is canceled if you enter the User Box that has not been registered in the controller.
% Symbol input is disabled by default. If you want to enable the symbol input, contact your service
representative.
% Make sure to record the user box name. You need the name when you import scanned data from
computers.
5
Press [Scan Settings].
% Press [Register] to register the inputted box.
6
Follow the Step 5 and after of "When a Box is Already Registered" (p. 6-12).
bizhub PRESS C8000
6
6-15