Biostar NF61S MICRO AM2 SE Setup Manual page 91

NF61V Micro AM2 SE / NF61S Micro AM2 SE
Memory Hole Remapping
The Choices: Enabled (default), Disabled.
Auto Optimize Bottom IO
The Choices: Enabled (default), Disabled.
Bottom of [31:24] IO space
The Choices: Min=0000 Max=00FF; Key in a HEX number.
Bottom of UMA DRAM [31:24]
The Choices: Min=0000 Max=00FC; Key in a HEX number.
Special Notice:
If the system's frequency that you are selected is not functioning, there are two methods
of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as " ON" status. All the
CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on pressing the
<Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It's strongly recommended to set CPU Vcore and clock in default setting. If th e CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.
BIOS Setup
36