Biostar NF61S MICRO AM2 SE Setup Manual page 90

NF61V Micro AM2 SE / NF61S Micro AM2 SE
CS drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
MA drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
MCLK drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
MD drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
DQS drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
Dram on-die Terminator
The Choices: Auto (default), Disable, 75ohm, 150ohm, 50ohm.
Read/Write Queue bypass
The Choices: Auto (default), 2 times, 4 times, 8 times, 16 times.
Bypass Maximum
The Choices: Auto (default), No bypass, 1 time ~ 15 time.
32 Byte Granularity
The Choices: Auto (default), 64-byte, 32-byte.
Timing Mode
The Choices: Auto (default), MaxMemClk.
Memory Clock value or Limit
The Choices: DDR 400 (default), DDR 533, DDR 667, DDR 800.
DQS Training Control
The Choices: Skip DQ S (default), Perform DQS.
CKE base pow er dow n mode
The Choices: Disabled (default), Enabled.
CKE base pow erdow n
The Choices: Per Channel (default), P er CS.
Memclock tri-stating
The Choices: Disabled (default), Enabled.
BIOS Setup
35