Biostar NF61S MICRO AM2 SE Setup Manual page 22

Motherboard Manual
He ade r for Memory ove r-voltage: JDDRII_22V1
When processing Memory ov er-voltage, please place the jumper to pin2-3
Closed. The Def ault setting is Pin 1-2 Closed.
Note:
1. When "JDDRII_22V1" jumper cap is placed on Pin 1-2, memory voltage
can be manually adjusted in CMOS setup screen.
2. When "JDDRII_22V1" jumper cap is placed on Pin 2-3, memory voltage
will be f ixed at 2.2V automatically, and can't be adjusted under COMS
setup.
Bef ore setting memory over-v oltage, please ensure that your DDR2 supports up
to 2.2V . (Consult your DDR2 supplier)
JSPDIF_O UT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
20
1
1
3
3
Pin 1-2 Cl ose:
Normal status (defa ult).
1
3
Pin 2-3 Cl ose:
Memory voltag e 2.2V.
Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground
3 1