Security Option; Apic Mode; Mps Version Control For Os; Full Screen Logo Show - Biostar NF61S MICRO AM2 SE Setup Manual

NF61V Micro AM2 SE / NF61S Micro AM2 SE

Security Option

This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
Setup (default):
This will only apply if passwords are set from the Setup main menu.

APIC MODE

Selecting Enabled enabl es APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.

MPS Version Control For OS

The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor speci fication.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used fo r OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.

Full Screen Logo Show

The Choices: Disabled, Enabled(default).
Small Logo(EPA) Show
This item allows you to select whether the "Small Logo" shows. Enabled
(default) " Small Logo" shows when system boots up. Disabled No "Small
Logo" shows when system boots
The Choices: Enabled (default), Disabled

Summary Screen Show

This item allows you to enable/disable the summary screen.
means system configuration and PCI device listing.
The Choices: Disabled (default), Enabled.
BIOS Setup
A password is required fo r the system to boot and is also
required to access the Setup Utility.
A password is required to access the Setup Utility only.
14
Summary screen