Biostar NF61S MICRO AM2 SE Setup Manual page 73

NF61V Micro AM2 SE / NF61S Micro AM2 SE
RAID Config
RAID Enable
This option allows you to enable or disable RAID function.
The Choices: Disabled (default), Enabled.
S ATA 1/2 Primary/Secondary RAID
This option allows you to enable or disable SATA A P rimary/Secondary RAID.
The Choices: Disabled (default), Enabled.
On-chip IDE Channel 0
The motherboard chipset contains a P CI IDE interface with support for two
IDE channels. Select " Enabled" to activate the first and/or second IDE interface.
Select " Disabled" to deactivate an interface if you are going to install a primary
and/or secondary add-in IDE interface.
The Choices: Enabled (default), Disabled.
Primary Master/Slave PIO
The IDE P IO (P rogrammed Input / Output) fields let you set a P IO mode (0-4)
for each of the IDE devices that the onboard IDE interface supports. Modes 0
to 4 will increase performance progressively. In Auto mode, the system
automatically determines the best mode for each device.
The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.
BIOS Setup
18