Tech Raid Bios Utility - Asus A7V600-X User Manual

3.4.2 Entering VIA
1. Boot-up your computer.
2. During POST, press <Tab> to enter VIA RAID configuration utility.
The following menu options will appear.
The RAID BIOS information on the setup screen shown is for reference only.
What you see on your screen may not be exactly the same as shown.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Channel
Channel0 Master
Channel0 Slave
Channel1 Master
Channel1 Slave
On the upper-right side of the screen is the message and legend box. The keys on
the legend box allows you to navigate through the setup menu options. The
message describes the function of each menu item. The following lists the keys
found in the legend box with their corresponding functions.
F1 :
View Array/Disk Status
, :
Move to the next item
Enter :
Confirm the selection
ESC :
Exit
ASUS A7V600-X Motherboard
®

Tech RAID BIOS Utility

VIA Tech. RAID BIOS Ver 0.96
Create a RAID array with
the hard disk attached to
VIA IDE controller
F1
,
Enter: Confirme the selection
ESC
Drive Name Array Name
XXXXXXXXXX
XXXXXXXXXX
No Drive
No Drive
: View Array/Disk Status
: Move to next item
: Exit
Mode Size(GB) Status
xxxxx xxx.xx Hdd
xxxxx xxx.xx Hdd
3-9