Entering Via Tech Raid Bios Utility - Asus K8V SE User Manual

5.7.2 Entering VIA Tech RAID BIOS Utility

1. Boot-up your computer.
2. During POST, press <Tab> to enter VIA RAID configuration utility.
The following menu options will appear.
The RAID BIOS information on the setup screen shown below is for
reference only. What you see on your screen may not exactly match
what is shown here.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Channel
Serial_Ch0 Master
Serial_Ch1 Master
On the upper-right side of the screen is the message and legend box. The
keys on the legend box allows you to navigate through the setup menu
options. The message describes the function of each menu item. The
following lists the keys found in the legend box with their corresponding
functions.
<F1> :
, :
<Enter> :
<ESC> :
ASUS K8V SE Deluxe motherboard
VIA Tech. RAID BIOS Ver 1.XX
Drive Name Array Name
XXXXXXXXXX
XXXXXXXXXX
View Array/Disk Status
Move to the next item
Confirm the selection
Exit
Create a RAID array with
the hard disk attached to
VIA IDE controller
F1 : View Array/Disk Status
, : Move to next item
Enter: Confirme the selection
ESC : Exit
Mode Size(GB)
xxxxx xxx.xx
xxxxx xxx.xx
Status
Hdd
Hdd
5-27